I don't normally do test runs of things I make. I just like to dive into something and hope for the best. More than likely, it comes out just fine. And if not, then that becomes the test piece. It's a win-win.
My newest obsession is shibori, which for those of you who might not know is the Japanese art of resist fabric dying. In the states, tie-dyeing t-shirts is the closest thing we know, taken from one type of shibori (kanoko). Other methods of shibori include: pole wrapped (arashi), pleated (suji), clamped (itajime), and stitched (nui). I could go on and on about this stuff, but today I'll only bore you with the stitched method.
Recently I discovered a book at the library called Woven Shibori which takes this theory and it applies it to the loom. But instead of hand stitching in the thread, I weave it into the cloth. How genius is that?! I'm so fascinated by this that it's taken over my weaving project thoughts. And since I've never done this (not even hand stitched fabric shibori), I have no idea what it's going to do to the fabric. Which is why I decided to do some actual test pieces.
I used some variegated cotton thread that I've had sitting on the shelf for years. I have no clue as to why I bought it. I really hate variegated yarn because it never gives you the result you think you'll get. I figured it would be good practice yarn. I think I was right since the resulting fabric is so ugly.
I decided to go even further with the test piece and even added some wool threads. The plan is to dip the end into boiling water; the hot water should shrink the wool but not the cotton and it should naturally pucker. We'll see how that goes.
So this is what the test piece looked like B.D. (before dyeing):
This is what it looked like A.D. (After Dyeing):
